The VMCH series compression hot micro gas consumption regeneration adsorption dryer first uses high-temperature and high-pressure compressed air to compress and heat the wet adsorbent for regeneration. After the compression and heating stage is completed, a small amount of finished compressed air is heated by the heater to the appropriate temperature for secondary heating and regeneration of adsorbent. The cooling stage involves using a small amount of finished compressed air to cool the adsorbent.
The VMCH series compression hot micro gas consumption regeneration adsorption dryer first uses high-temperature and high-pressure compressed air to compress and heat the wet adsorbent for regeneration. After the compression and heating stage is completed, a small amount of finished compressed air is heated by the heater to the appropriate temperature for secondary heating and regeneration of adsorbent. The cooling stage involves using a small amount of finished compressed air to cool the adsorbent.
●The adsorption tower adopts a special diffusion structure internally,, resulting in a more uniform distribution of airflow inside the tower
●Standard configuration hard sealed pneumatic butterfly valve, resistant to high temperature, low pressure loss, and long service life
●Cooling water flows through the tube, making it easy to clean
●After selecting a dew point loosening device, the dew point of the finished gas is more stable.
Standard configuration
● LCD display
●Remote Control/Short Range Control
●Dew point/load control
● Modbus RTU communication protocol
●Online dew point monitoring
●Stainless steel control pipeline
Option
● Schneider/Siemens electronic control components
● Pipeline stainless steel material/Stainless steel material for adsorption twoer
● Mainstream communication protocols such as modbus tcp/ip, profinet ,ethercat, etc
Performance parameter
●Working pressure: 0.7-1.0Mpa
● Ambient temperature:5-45℃
● Intake temperature: 110-130℃
● Standard pressure dew point :-40℃
● Average regeneration gas consumption:3%
● Average pressure drop: 0.035Mpa
● Electrical level : IP55
● Noise level: ≤85 dB(A)
● Standard intake conditions: 0.7Mpa/38℃
● Cooling water temperature: 32℃
● Cooling water pressure: 0.3-0.5Mpa
Technical parameter table
Product Model | Treating flow capacity Nm3/min | Equipment weight Kg | External Shape Dimensions | ||
Length | Width | Height | |||
VMCH11-40-58 | 58 | 6400 | 3300 | 2950 | 3200 |
VMCH11-40-70 | 70 | 6800 | 3500 | 3100 | 3200 |
VMCH11-40-98 | 98 | 8000 | 3800 | 3300 | 3600 |
VMCH11-40-114 | 114 | 11000 | 4200 | 2700 | 3100 |
VMCH11-40-130 | 130 | 12500 | 4400 | 2800 | 3100 |
VMCH11-40-162 | 162 | 14000 | 4400 | 2800 | 3350 |
VMCH11-40-184 | 184 | 16000 | 5000 | 3200 | 3400 |
VMCH11-40-207 | 207 | 17000 | 5300 | 3400 | 3400 |
VMCH11-40-233 | 233 | 18500 | 5400 | 3400 | 3400 |
VMCH11-40-260 | 260 | 20000 | 5800 | 3500 | 3450 |
VMCH11-40-288 | 288 | 22000 | 6100 | 3500 | 3550 |
VMCH11-40-317 | 317 | 23000 | 6250 | 3600 | 3550 |
VMCH11-40-345 | 345 | 25000 | 6400 | 3600 | 3600 |
VMCH11-40-380 | 380 | 26500 | 5200 | 5500 | 4800 |
VMCH11-40-415 | 415 | 28500 | 5400 | 5500 | 4800 |
VMCH11-40-450 | 450 | 29500 | 5500 | 5650 | 5000 |
Phone : 15577777777
Email : sales@genius.com
No.15,Kaifa North 26th Road,Economic and Technological Development district,Shenyang
