Air tanks can be used to store compressed air in factories that use compressed gas, ensuring the requirements during peak gas usage;Used to stabilize the pressure of the gas source and play a buffering role; Cooling the moisture and dirt in the air and allowing them to be discharged from the system,Eliminate or weaken the periodic current pulsation of the exhaust of the piston air compressor, stabilize the pressure in the pipeline, and complete the necessary start-up operation procedures for the supply pipeline in a short period of time after shutdown.
The VZCH series compression heat zero gas consumption regeneration adsorption dryer first uses high-temperature and high-pressure compressed air to compress and heat the wet adsorbent for regeneration. After the compression heating stage is completed, turn on the auxiliary heater to perform secondary heating and regeneration of the adsorbent. The sooling stage is achieved by blowing compressed air through the after-cooler to the required room temperature for adsorption and reaching a high degree of dryness until regeneration is completed.
The VZAH-40 series hot blast zero gas consumption regeneration adsorption dryer uses a blower to suck in ambient air and heat it in the same direction to regenerate the wet adsorbent. The cooling uses a blower and an intercooler for closed -loop cooling of the high-temperature adsorbent. The entire regeneration process does not consume expensive product dry air, resulting in lower operating costs
The VCMA series refrigerated dryer reduced the temperature of compressed air from 2 ℃, and a large amount of water vapor condenses into water. The refrigeration chamber dryer uses the principle of refrigeration to cool compressed air at higher temperatures to about 2℃-3℃ and discharge the condensate, thereby achieving the purpose of drying compressed air.
Phone : 15577777777
Email : sales@genius.com
No.15,Kaifa North 26th Road,Economic and Technological Development district,Shenyang
